Daktronics All Sport 1600 Series, Operation Manual

Page: 19 / 92

Basic Operation 11
Multiple Controller with Multiple Broadcast Groups
In a multiple controller system with multiple broadcast groups ( Error! Reference source not
found. ), there are many consoles that control multiple scoreboards and/or scoreboard
groups. The radio receiver inside the scoreboard is set to broadcast group 1–4 (Gen V) or 1–8
(Gen VI). By changing the console settings to the specific broadcast group address, a single
console can control all scoreboards or specific groups of scoreboards. One example of this
scenario is split court operation in basketball installations, where scoreboards are used to
score multiple games at once, but can be grouped together to show one game if necessary.
Figure 7: Multiple Broadcast Group
BCAST 1, CHAN 1 BCAST 1, CHAN 2
BCAST 1, CHAN
01
BCAST 1, CHAN 02
BCAST 2, CHAN 1
BCAST 2, CHAN 01
BCAST 1, CHAN 00
BCAST 2, CHAN 02
BCAST 2, CHAN 00
BCAST 0, CHAN 00
to control all at once
Or
BCAST 1-2,
CHAN 00
to control a specific
broadcast group
Or
BCAST 1-2,
CHAN 01-02
to control a specific
scoreboard
BCAST 2, CHAN 2