• Plug charger into confirmed functional wall outlet
• Confirm charger is active via green LED on charger
• Insert the silver pins into the tops of the
POST TERMINALS
• Activate
POST TERMINAL SWITCH
on Powerbox 10
• Clamp the RED clip to the silver pin in the RED
POST
• Clamp the BLACK clip to the silver pin in the BLACK
POST
• Charger LED will turn red when charging cycle begins and stay
red while charging
• Charger LED will turn green when charge is complete
• Initial charge will take 3-4 hours
NOTE:
MASTER POWER SWITCH
does not need to be active
for charging
CHARGING
