PX-7 Ultrasonic Thickness Gauge
21
Connecting To a Computer
1) Connect the accessory cable (part# N-306-0010) to the 2 pin jack
located on the bottom of the
PX-7
, and the 9 pin connector to a
serial port on the computer.
2) Start the communications software that will be used to collect the
measurements (i.e. Windows 95/98 - HyperTerminal).
3) Setup the communications software using the following
parameters:
Data Bits - 8
,
Parity - None
,
Stop Bits - 1
,
Baud
Rate 1200
.
4) Set the communications software
COMM
port to the port number
that the
PX-7
is connected.
5) After taking a measurement, press the
SEND
key to send the
measurement to the computer. The measurement will be displayed
on the computer screen.
NOTE: Communications software packages generally have the ability
to capture the screen data to a common text file. This text file,
containing the measurements, can then be imported into any
common spreadsheet program (i.e. Excel, Quattro Pro, Lotus123)
for further reporting requirements.
www.
.com
1.800.561.8187
