Dakota Ultrasonics
26
Note:
•
The data logger will
automatically advance
to the next storage
location in sequential order.
9) Repeat
step 8
as required.
Clearing a Storage Location
The user may require a storage location, that is currently full, be over
written. This procedure is outlined in the following steps:
Note:
§
Assuming the steps in
Using The Data Logger
have been
completed
, and
step 8
is being repeated.
1) Press the
UP
/
DOWN
arrow keys to move to the location to be
over written.
Note:
§
If the user attempts to write to a location that is currently full, the
display will flash the
FuLL
symbol.
2) Press the
CLR
key to delete the contents of the storage location.
The display will flash the storage location ( L011, L099, etc. ) and
the
CLr
symbol.
3) Take another measurement, and press the
SEND
key to write to
the same storage location just cleared.
Summary of Contents for MX-5
