manualshive.com logo in svg

DAKOTA ULTRASONICS MX-5 DL, Operation Manual

Share
Download
DAKOTA ULTRASONICS MX-5 DL Operation Manual Download Page 7

MX-5 DL Ultrasonic Thickness Gauge 

 

3 

 

OPERATION 

The 

MX-5 DL

 interacts with the operator through the membrane keypad 

and the LCD display.  The functions of the various keys on the keypad are 

detailed below, followed by an explanation of the display and its various 

symbols. 

The Keypad 

 

This key is used to turn the 

MX-5 DL

 on and off.  When the tool is 

turned ON, it will first perform a brief display test by illuminating all of the 

segments in the display.  After one second, the tool will display the internal 

software version number and the current file location and status.  After 

displaying the version number, the display will show "0.000" (or "0.00" if 

using metric units), indicating the tool is ready for use. 

The 

MX-5 DL

 is turned OFF by pressing the 

ON/OFF

 key.  The tool has 

a special memory that retains all of its settings even when the power is off.  

The tool also features an auto-powerdown mode designed to conserve 

battery life.  If the tool is idle for 5 minutes, it will turn itself off. 

Summary of Contents for MX-5 DL
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands