Dakota Micro, Inc.
DMOV
-
RH User Manual
Rev: 06/29/17 Page 6 of 12
Author: CNR
B.
Transmitter Installation
When being used with an OverView
®
Camera:
1)
Attach supplied 3dBi antenna (1) or optional
larger accessory antenna (details on page 4 of
manual).
2)
Plug in the provided A/C power adaptor into rear
of transmitter (2), then plug into outlet to power.
3)
Plug the OverView
®
camera directly into the
wireless
c
amera
input
(3)
4)
Extension cables may be used to locate the
camera away from the transmitter for a distance
of up to 160 feet.
5)
The transmitter must have only one input used at
a time; either by front RCA inputs or camera input
(3).
C.
Receiver Installation
When being used with the Dakota Micro, Inc.
monitor:
1)
Plug the OverView connector into one of the
available monitor connectors (1).
2)
Power the monitor as instructed in the manual
(2). Only use the AC adaptor supplied with your
monitor.
IMPORTANT: Power must be available for both the transmitter and receiver. Use only the provided power supply or damage will
occur. DO NOT use the front inputs and the OverView
®
(rear) input at the same time, as serious damage will occur to the
transmitter. However , both of the outputs of the receiver may be used at one time for simultaneous display on a TV and
OverView
®
monitor. Do not allow the transmitter or receiver to get wet.
