Step – by – Step Instructions
1. Locate all tools & unpack all parts. Find a soft surface to work on to avoid scratching
the parts (carpet or towels work well).
2. Connect the
L and R Lid Stop Brackets
to the back of
the
Grill Body
, as shown at right, using two self-
tapping screws each. (The
L Lid-Stop Bracket
is
pictured.) Now when the lid is opened, it should rest
on the rubber grommets attached to the lid stops.
3. Open the
Lid
and attach the
Lid Handle
, as
shown at right, using four self-tapping screws.
Note: The handle angles down and towards
you.
Close the
Lid
.
4. Attach the
L Handle
. First, slide the back of the
handle into the
L Lid-Stop Bracket
. Line up the
two threaded studs with the slots on the lid-stop
bracket and slide the handle back. Attach the front
of the handle to the front of the
Grill Body
using
two hex-head bolts, as shown.
Tip: you may want a
second person to line everything up while you start the
two bolts; they can be a bit tricky to start otherwise.
You might also find it easier to tip the grill onto its
Right Side.
Tighten both bolts. Now start a #6 nut on
each of the studs on the back of the handle, as shown.
(605) 847-4713
(605) 847-4713
44136 200th St.
44136 200th St.
3/6
www.dakotagrills.com
www.dakotagrills.com
Lake Preston, SD 57249
Lake Preston, SD 57249
