Manual # 650798
WARNING:
This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
7. Using the four original mounting screws, fasten the VHX display into the dash.
8. Reassemble the dash in reverse order. Refer to the main VHX manual for control box wiring
and setup instructions.
9. Stock 3-Wire alternators may need an additional wiring connection at the gauge cluster
connector. You will need to add resistance from the Red/LT GRN wire in the 12
th
pin location
to the LT GRN/RED wire in the 11
th
pin location. This will ‘excite’ the alternator telling it to
begin charging. This can be done using the included alternator load harness.
