650374
6. With the modifications complete, plug the CAT5 cable in to the display, and feed the cable
through the opening on the right-hand side of the housing. Place the Dakota Digital gauge
cluster into the dash, taking care to align the mounting holes with those in the stock dash.
Remove the protective tape from the lens
4. You should be left with a bare housing. Remove all light bulbs and electrical contacts, as they
are not needed for the VHX system.
5. Using a die grinder, Dremel tool, or cut-off wheel, carefully trim the plastic bosses as shown.
This is necessary to mount the new gauge system.
Summary of Contents for VHX-78C-MC
Page 42: ...MAN 650314 D 34...
