Dakota Digital VHX-68D-STD Manual Download Page 3

Page: 3 / 4

Manual # 650663

6. Re-install the lower dash pad using the three (3) provided pan head screws. Then mount the switch

panel to the dash using the factory hardware from disassembly. Refer to the main manual for wiring
instructions to complete the VHX installation.

5. Mount the VHX system to the dash using the two (2) factory screws from disassembly for the

upper mounts and the provided four (4) oval head screws for the lower mounts.

Summary of Contents for VHX-68D-STD

Page 1: ...ymouth B Body Non Rallye Your new VHX 68D STD kit includes Installation Installation Manuals Control Box 36 CAT5 Cable Universal Sender Pack VHX Display 1 Remove the lower dash pad and switch panel an...

Page 2: ...all factory hardware for reassembly 4 Attach the provided CAT5 cable to the back of the VHX system and carefully route the open end to the control box mounting location as you mount the VHX system to...

Page 3: ...panel to the dash using the factory hardware from disassembly Refer to the main manual for wiring instructions to complete the VHX installation 5 Mount the VHX system to the dash using the two 2 fact...

Page 4: ...ARNING This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm For more information go to www P65...