background image

Manual # 650429C 

 

 

VHX-68C-VET 

Dakota Digital VHX Instrument Installation 

For 1968-’77 Corvette 

 

Your new VHX-68C-VET kit includes:  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Installation 

 

 

 

 

 

 

Control Box 

 

(2) ABS Mounting Brackets 
(2) Thumb Nuts 
 

  (1) 60” CAT5 Cable 
  (1) 36” CAT5 Cable  
  (1) 12” CAT5 Cable

 

Universal Sender 

Pack 

 

Installation Manuals

 

VHX Displays 

1.   Remove the stock gauge clusters from the dash and save all hardware for reassembly. 

 

(3) Block-Off Lenses 

Clock Switch Harness 

Clock Switch 

Extended ABS Mounting 
Bracket 
 

Washer 

 

Switch Assembly 

 

Summary of Contents for VHX-68C-VET

Page 1: ...ntrol Box 2 ABS Mounting Brackets 2 Thumb Nuts 1 60 CAT5 Cable 1 36 CAT5 Cable 1 12 CAT5 Cable Universal Sender Pack Installation Manuals VHX Displays 1 Remove the stock gauge clusters from the dash and save all hardware for reassembly 3 Block Off Lenses Clock Switch Harness Clock Switch Extended ABS Mounting Bracket Washer Switch Assembly ...

Page 2: ...me to clean or refinish the bezels 3A The Speedometer and Tachometer are interchangeable side to side Choose the orientation you prefer then place the Speed and Tach on the main lens spacers and secure the gauges with the six 6 stock mounting screws Use two 2 stock mounting screws to attach the ABS plastic brackets to the bezel and thumb screws to secure the brackets to the VHX gauges 3B Dashes wi...

Page 3: ...cable to the Tachometer and the other end to either port on the Speedometer connecting the two halves With the 36 CAT5 cable connect one end to the open port on the Speedometer and as the assembled cluster is installed into the dash carefully route the other end of the cable to the control box mounting location 636234 B 636243 A 636234 C 636234 B 1977 Style 1968 76 Style 6 With the block off lens ...

Page 4: ...o www P65Warnings ca gov 8 The clusters are now ready to re install into the vehicle using stock hardware Refer to the main manual for wiring instructions to complete the VHX installation 7 Attach the provided 60 CAT5 Cable and the 3 Pin Switch Harness to the back of the VHX display Carefully route the other ends to the control box mounting location and refer to manual 650360 for switch wiring ins...

Reviews: