MAN 650314
28
By default the available messages for each message display are:
Speed/LCD1 message displays
DESCRIPTION
.
ODOMETER
Odometer mileage (0-999,999)
A MILES
Trip A odometer mileage (0-9999.9)
B MILES
Trip B odometer mileage (0-9999.9)
KM/H
Alternate speed unit conversion
GEAR
(with optional GSS-2000)
Gear shift position indicator
SERVIC
(when enabled)
Miles since last service (0-9,999, or ---- when past due)
ENGINE
Check engine indicator
BRAKE
Brake warning indicator
4W DRV
4 wheel drive indication
WAIT
Diesel wait to start indicator
NOTE: In normal operation you have to use switch 1 (SW1) to reset trip meters, and
service counter. A press and hold will zero the current reading, if it can be reset. A press
hold will also clear warning messages such as ENGINE, BRAKE, etc.
Tach/LCD2 Message displays
DESCRIPTION
.
CLOCK
12 hour clock display
HOURS
Hours system has been on with tach signal (0-999.9)
HI SPEED
High speed recall (0-255)
0-60 MPH
0-60 mph time in seconds (0-25.5)
1/4
¼
MI SPD
Vehicle speed at end of ¼ mile
1/4 MI TIME
Time to travel ¼ mile from standing start
RPM
Digital tach readout on message display
HIGH RPM
High rpm recall (0-18,000)
Future BIM displays(optional)
BIM messages will display on message 2 display by default
NOTE: A press and hold of SW2 will zero the current reading, if it can be reset.
If you have the system powered up in normal mode you can scroll through the various display
screens with the press and release of the switches, SW1 or SW2. Whatever screen you were on
last will be recalled at the next power up. You can also select which screen you want certain
messages to appear on or if you want them displayed at all (covered under display setup).
If a warning limit or a change is sensed, the display screen may switch to that screen as a
warning indicator if it isn’t already being displayed. This is also true for systems that have the
optional gear position sensor installed; if the gear message isn’t displayed, whenever there is a
gear change the current gear screen will pop-up to indicate the gear change and after about three
seconds, revert back to the previous displayed message.
Summary of Contents for VHX-67C-CAM-K-B
Page 69: ...MAN 650314 D 34...
