Manual # 650787
Installation
1. Remove the factory instrument cluster by disengaging the four spring clips securing the instrument
cluster to the dash. No components from the original cluster will be reused, and it may be set aside.
2. Carefully insert the new VHX system into the front of the dash. From the back side, place the two
provided
Short Brackets
on the top studs, and the two
Long Brackets
on the bottom studs. Firmly
tighten the brackets down with the provided
Nylon Thumb Nuts
.
3. Attach the provided
36” CAT5e Cable
to the back of the VHX system. Carefully run the other end of this
cable to the control box mounting location. Refer to the main VHX manual for wiring instructions to
complete the installation.
WARNING:
This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to