Manual # 650640
3. Peel the protective cover off the Blackout Lens and place it over the gear indicator opening with
the protected side facing down and glue it in place using a black RTV silicone or similar to. Let
the silicone fully setup and dry before moving on to the next step to prevent damage to the
Blackout Lens.
2. Looking at the back of the gauge cluster; remove the clock by rotating the clock ¼ turn in a
clockwise direction until the mounting tabs release and the clock can be pushed out. Also remove
and retain the four (4) bolts indicated below to completely remove the stock gauges.
4. Secure the VLC Clock by placing it into the clock bezel opening from the front orientated as shown
below; rotate the clock in a counter-clockwise direction until the mounting tabs lock into place.
