650066
12
GAUGE SYSTEM FEATURES
Mileage readings
•
Million mile odometer
•
Re-settable trip mileage (0-999.9)
•
Re-settable service mileage (0-9999)
Performance readings
•
High speed recall. This is reset at power up and can be manually reset.
•
High rpm recall. This is reset at power up and can be manually reset.
•
0-60 mph (0-100kmh) time. This is reset automatically when speed is zero.
•
¼ mile time. This is reset automatically when speed is zero.
•
¼ mile end speed. This is reset when the ¼ mile time restarts.
Hour meter
•
Re-settable hours (0-999.9)
English/metric conversion
•
Alternate speed can be displayed on message display.
Special tachometer displays
•
On systems that do not have bar graph displays, a bar tach can be shown on the
message display.
•
On systems that do not have a digital tachometer display, the rpm can be shown on the
message display or the tachometer reading can be switched onto the speed display.
Demonstration mode
•
Holding switch 2 while turning on the key will start the system going through a preset
sequence of readings. To exit the demo mode, turn the key off. You may also wire up a
separate switch to power the gauges for demo mode without powering the entire vehicle.
Built-in Indicators
•
Left/Right Turn signal indicators
•
High Beam indicator
•
Check Engine indicator
•
Brake warning indicator
•
4x4 indicator
•
Wait to Start indicator
•
Cruise control indicator
•
Gear position indicator which displays full gear word
Special outputs
•
Shift output to turn on external light
•
Selectable 2000 ppm or 4000ppm speed output for cruise or ECM
Summary of Contents for VFD3
Page 13: ...650066 11...
