Manual # 650728
WARNING:
This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
4. Refer to the main manual for wiring instructions to complete the RTX installation.
2. From the rear of the dash; insert the RTX system into the opening and securely mount using the four
10-24 screws provided. The two (2) counter sunk screws are for the upper two locations and the two
(2) pan heads are for the lower two locations.
3. Connect the provided harness and the buzzer (optional for audio feedback) to the back of the
RTX system. Route the other end of the main harness to the control box.
Buzzer Connector
