MAN#650194
PGR-1000-F
Programmable Gear Readout
Fairing Mount (1.2
5” hole)
See back page for alternative wiring for bikes w/ECM tach output
Display readout:
‘n’
-transmission in neutral
‘-‘
-no speed or rpm signal. (key on with engine off)
‘0’
-engine is running, but no speed signal. (key on with engine on)
‘E’
-speed signal is present, but no rpm signal.
‘1’ – ‘7 ’
-current transmission gear.
‘C’
-settings cleared and waiting to learn gear pattern.
Programming:
When the display shows a f
lashing ‘C’ or ‘n’ it is ready to start learning the gear pattern.
After you start the engine you should see a flashing ‘0’.
Once you start driving this will change to a flashing ‘1’.
Drive at a constant speed in 1
st
gear for 20-25 seconds. Once the display quits flashing,
shift to 2
nd
.
Drive at a constant speed in 2
nd
gear for 20-25 seconds. Once the display quits flashing,
shift to 3
rd
.
