MAN #650777
4
System features
INDICATORS
INFORMATION DISPLAYS
There are 5 reading locations available to display information. They are labeled LEFT TOP, LEFT BTM, CENTER, RIGHT
TOP, RIGHT BTM, respectively. The center location has 3 selectable readings that can be displayed, speed, tach or gear.
The other locations can show any of the information readings listed below. See switch operation on page 6.
Right or Left side display readings
Description
ODOMETER
Odometer reading (0-999,999)
TRIP A
Trip A odometer reading (0-9999.9)
TRIP B
Trip B odometer reading (0-9999.9)
SERVICE (when enabled)
Distance to next service (0-7500.0 or ----
TRIP HR
Hours gauge has been on with engine running HH:MM (00:00 to 99:59)
SPEED km/h
Alternate speed unit conversion
RPM
Digital or Bar RPM reading (0-15,990)
OIL TEMP (with optional sender present)
Engine oil temperature
OIL PSI (with optional sender present)
Engine oil pressure
VOLTS
System voltage
GEAR/CLOCK
Gear position and 12-hour clock display
FUEL
Digital or bar displayed when using sender
Performance readings
HIGH MPH
High speed recall
0-60 TIME
0-60 mph time in seconds
Quarter mile speed/time
Speed at end of ¼ mile (trap speed) and ¼ mile time from standing start
HIGH RPM
High RPM recall
Center display readings
MPH/km/h
Speed
RPM
Digital or Bar RPM reading (0-15,990)
GEAR
Gear position
MBM (Motorcycle Bus interface Module)
MBM displays (optional)
Readings for connected modules
Right turn
(green)
Neutral
(green)
High beam
(blue)
Left turn
(green)
Low oil
(red)
Security
(red)
Check engine
(red)
Light sensor
Right Switch
Left Switch
ABS
(red)
