MAN# 650369
TRIP SWITCH
The trip switch on the handle bar allows access to all of the mileage, rpm, and performance information. Pressing
and releasing the trip switch toggles through the different displays. Press and holding the switch will reset the current
display. If the switch is pressed while the key is off the clock and odometer can be displayed.
The display sequence is as follows:
CLOCK
>
12
:
00
12 hour clock
ODOMTR
>
000000
odometer mileage
TRIP A
>
A
000.0
trip meter mileage A
TRIP B
>
B
000.0
trip meter mileage B
SERVIC
>
S 0000
miles since last service (if programmed)
KPH
>
++++++
metric speed conversion (to mph if metric unit is selected)
* HI SPD
>
HI 00
high speed recall
* 0-60 T
>
60 00.0
0-60mph time (0-100kph)
* QUARTR
>
25 00.0
quarter mile time
* QT MPH
>
25 00
quarter mile speed
RPM
>
0000
RPM
rpm reading in alpha display
* HI RPM
>
H 0000
high rpm recall
VOLTS
>
00.0
V
displays voltage to gauge
PRESSURE
>
00
P
pressure reading (only shown if sender is connected)
TEMP
>
000 F
temperature reading, “C” if metric (only show if sender is connected)
* HOURS
>
HR 0.0
re-settable hour meter
RANGE
>
R 250.0
or
range
distance to empty (if turned on)
The 0-60 and ¼ mile timers are zeroed by pressing and holding the switch while that timer is displayed. The timer will not
restart until the speed reaches zero and then you start driving again.
Display functions with a ‘*’ in front of them are only shown with performance readings turned on.
