background image

 

 

MAN# 650280:D 

 

 
 
 
 

SERVICE AND REPAIR 

DAKOTA DIGITAL offers complete service and repair of its product line.  In addition, technical consultation is available to help you work through any 

questions or problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most 
problems. 
Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization 
number.
  Package the product in a good quality box along with plenty of packing material.  Ship the product by UPS or insured Parcel Post.  Be sure to include the 
RMA number on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a 
telephone number where you can be reached during the day.  Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase.  
Send no money.  We will bill you after repair.   

 

Dakota Digital 24 Month Warranty 

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material 

or workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such defect(s) will be repaired or replaced at Dakota Digital’s option.  

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product.  This Warranty 

does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, 
neglect, or accident. 

This Warranty is in lieu of all other expressed warranties or liabilities.  Any implied warranties, including any implied warranty of merchantability, shall be 

limited to the duration of this written warranty.  Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought 
within a period of 24 months from date of original purchase.  No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed 
herein in connection with the sale of this product. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Summary of Contents for MCL-2002













Reviews: