[5]
MAN #650506C
Setup:
To Set or Change ID number:
✓
Each BIM module (BIM-01-2 excluded) uses one or more ID channels to send data to the control box.
✓
The ID will not normally need to be changed.
✓
A green-red-red flash on the BIM-17-2 status light indicates an ID conflict with another connected BIM.
✓
The following procedure will allow the BIM-17-2 to automatically select a new, unused ID.
•
Hold the setup switch on the BIM-17-2 while turning the key on.
o
The BIM status light will rapidly flash RED.
•
Release the switch. The status light will flash a slow red.
•
When the status light begins flashing green, it is finished
– turn the key off.
Programming notes:
➢
Calibration and warning points are set up through the instrument system (VFD/VHX/HDX/RTX) setup menu.
➢
Temperature unit will follow the unit set for the main water temp gauge.
➢
The calibration should be done in an open area such as an empty parking lot to avoid any external interference.
True North Magnetic Field Offsets for the US:
The magnetic field of the Earth does curve around the globe and the offsets can be entered into the setup to correct for
slight offsets in directional headings.
