Freephone New Zealand: 0508 242 333
Phone (64) 6 751 2969
Fax (64) 6 751 2717
PO Box 730, New Plymouth 4342
NEW ZEALAND
CODING THE RECEIVER:
1. Open the receiver case by inserting a small screwdriver into one of the pry notches on the side of the
case (refer to receiver manual) and gently lift off the front cover.
2. Locate the eight dip switches on the receiver and make sure they are set identically to dip switches 1-8
on the transmitter.
Note: If more than one transmitter is used with the receiver, the first eight dip switches of all
transmitters must match the eight dip switches of the receiver.
Note: Whenever a change is made to the time jumper or the dip switches, the receiver must be
turned OFF and then back ON to operate properly.
TECHNICAL SUPPORT:
If you encounter any difficulty in the operation of this product after reading the manual, please contact us.
We will be happy to answer your questions and help you in any way we can.
WARRANTY:
Dakota Alert warrants this product to be free of defects in material and workmanship for a period of one
year from the date of purchase. This warranty does not cover damage resulting from accident, abuse, act of
God or improper operation. If this product does become defective, simply return it to Target Technology Ltd.
Please include a note describing the troubles along with your name and return address as well as the original
sales receipt. If the product is covered under warranty it will be repaired or replaced at no charge. If it is not
covered by warranty, you will be notified of any charges before work is done.
Freephone Australia: 1300 588 195
Fax (64) 6 751 2717
PO Box 7338, Toowoomba South 4350
Queensland
AUSTRALIA
