background image

7

SPECIFICATIONS

• 

Power supply: 

12 VDC, 500 mA

• 

Wireless range: 

up to 1 mi. (1.6 km)*

*Actual range will vary depending on local terrain and obstructions.

• 

Dimensions:

 3.25 × 1.75 in. (8.25 × 4.45 cm)

• 

Operating temperature: 

-30 to 120°F (-34.4 to 48.9°C)

• 

Operating frequencies: 

433 MHz

TECH SUPPORT

If you have problems using this product after reading this manual, please contact us. You can reach us by phone at 

605-356-2772 from 8:30 AM to 5:00 PM Monday through Friday (Central Standard Time). We will be happy to answer 

your questions and help you in any way we can.

WARRANTY

Dakota Alert warrants this product to be free of defects in materials and workmanship for a period of one year from 

the date of purchase. This warranty does not cover damage resulting from accident, abuse, act of God, or improper 

operation. If this product does become defective, simply return it to Dakota Alert. Please include a note describing 

the troubles along with your name and return address as well as the original sales receipt. If the product is covered 

under the warranty it will be repaired or replaced at no charge. If it is not covered by the warranty, you will be 

notified of any charges before work is done.

LEGAL NOTICES

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this 

device may not cause harmful interference, and (2) this device must accept any interference received, including 

interference that may cause undesired operation. Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the equipment. This equipment has been 

Summary of Contents for DCR-4000









Reviews: