5
3. Press (volume) repeatedly until you find the tune you want to use.
1 Ding Dong (high)
5 Alarm/Siren
9 William Tell
2 Ding Dong (low)
6 Coo Coo Clock
10 Cannon in D
3 Westminster
7 Bird Chirping
11 Morning
4 Fur Elise
8 Twinkle Twinkle
12 Toreador March
4. After you choose a tune, activate the transmitter (for example, press its button or activate
the motion sensor). The receiver emits a short beep.
Note:
If you accidentally activate the transmitter on a tune you don’t want, press the (volume) button
to continue cycling through the tunes to select the tune you want, then reactive the transmitter.
5. If you are coding more than one transmitter, repeat steps 3 and 4.
6. After your transmitter(s) are coded, press and hold the
MODE
button until the LEDs stop
flashing.
7. To test the transmitter tune, activate the transmitter. You’ll hear the selected tune through
your receiver and the LEDs will flash.
ADJUSTING THE VOLUME
• Press the (volume) button repeatedly to adjust the volume (four levels and off). The lights
show the volume level for four seconds.
Summary of Contents for DCR-4000
Page 2: ...2 ...
