26
• Locate the refrigerator in a well ventilated
place inside the house. Floor must be flat and
strong enough. Turn the leveling legs up or
down in order to level the unit.
• Allow a 30 cm clearance above the appliance.
Allow 10 cm min. clearance to walls and back of
the refrigerator. This will allow heat dissipation
and to comfortably open and close the appli-
ance door.
• Wipe the inside and outside of the refrigerator with a warm damp
cloth. Damp cloth in a solution made with a small amount of de-
tergent and warm water. Finally wipe clean using a cloth damp-
ened with clean water.
• Once the refrigerator is located in its final place,
allow it to rest for half an hour before connect-
ing it to the power supply.
• Allow the refrigerator to run empty for 2 to 3
hours before loading fresh or frozen foods. Dur-
ing summer, allow the unit to run empty for 4
hours considering that the room temperature is
higher.
initial start up
• Please leave enough space at the front so you
can comfortably open and remove the drawer.
• Dimensions are shown for reference only.
Summary of Contents for DAC120BY
