Cables Needed:
(2)XLR Male to
¼
” TRS Male
(3)XLR Female to
¼
” TRS Male
Steps:
1. Patch from the bottom back jack on the patch bay
module to an input on the MP 4T using the
¼
” TRS to
XLR Male cable.
2. Patch to top jack of the patch bay module from an
output of the MP 4T using the XLR Female to
¼
” TRS
cable.
3. Now you can patch into a mic pre from the front of
the patch bay. Simply run a patch cable from your
source microphone into the bottom jack on the
module and then run from the top jack on the
module to wherever the signal needs to go.
