DAKEN SPRAYERS
6.
Ensure tank
flushed
Ensure tank is flushed of all chemicals from prior uses.
- Chemicals can interact dangerously when mixed, and residue chemicals are also a health hazard.
7.
Fill tank
Add pesticide to tank through fill cap:
a) Confirm the chemical/water dilution ratios specified on the chemical label.
b)Determine chemical and water volumes needed for the planned application, taking into consideration
that maximum tank capacity is 200 Litres.
Note: Only purchase and mix as much chemical as you need for the planned application in order to
minimize chemical over application and the need for storing unused chemicals.
c) Add chemical to the tank through the fill cap.
If the chemical is not pre-mixed, add water and pesticide concentrate in the order prescribed on the label.
9.
Ensure chemical
mixed
Ensure chemical is thoroughly mixed in tank.
- Stirring device should be made of metal or plastic, non-chemical absorbing material, and then properly
cleaned and stored after use.
10. Replace fill cap
Replace the fill cap and tighten securely.
OPERATION - USING THE SPRAYER
[continued]
- 22 -
Summary of Contents for D200SS
Page 31: ......
