Dake SE-912, Instruction Manual

Page: 14 / 34

- 14 -
BLADE DIRECTION OF TRAVEL
Be sure the Made is assembled to the pulleys such that the vertical edge engages the work
piece first.
BLADE MOVEMENT
Blade Direction
STARTING SAW
Switch button function description
CAUIION: NEVER OPERATE SAW WITHOUT BLADE GUARDS IN PLACE.
Be sure the blade is not in contact with the work when the motor is started. Start the motor, allow
the saw to come to full speed, and then begin the cut by letting the head down slowly onto the work.
DO NOT DROP OR FORCE. Let the weight of the saw head provide the cutting force. The saw
automatically shuts off at the end of the cut.
BLADE SELECTION
An 8-tooth per inch, general-use blade is furnished with this metal Cutting Band Saw. Additional
blades in 4, 6, 8, and 10 tooth sizes are available. The choice of blade pitch is governed by the
thinness of the work to be cut: the thinner the work piece, the more teeth advised. A minimum of
three (3) teeth should engage the work piece at all times for proper cutting if the teeth of the Blade
(Emergency Push Button)
(Start Button)
(Stop Button)
(Coolant Selection Switch)