Dake Corporation
724 Robbins Road
Grand Haven, MI 49417
www.dakecorp.com
7
REV012019
•
Do not operate tool under the influence of drugs, alcohol, or any medications that would
affect user’s ability to operate tool.
•
Never leave tool unattended and do not leave until blade has come to a complete stop.
•
Always keeps hands and fingers away from the blade.
•
Stop the machine before removing chips.
•
Shut off power and clean tool and work area before leaving the machine.
Use of machine:
•
Do not force tool.
•
Use vice to secure work before cutting.
•
Maintain tool condition. Keep tool sharp, lubricated and clean for the best and safest
performance.
•
Adjust and position the blade arm before starting to cut.
•
Keep blade guide arm tight, a loose guide arm will affect tools accuracy.
•
Make sure blade speed is set for the material being cut.
•
Ensure the blade size and type is proper for the job.
•
Machine is intended to be used only used for general metal cutting within the range of
cutting capacity.
Working environment:
•
Saws weighted sound pressure level: 80dB.
•
Keep work area clean.
•
Do not use in a dangerous environment: do not use in damp or wet location or expose
them to rain.
•
Keep work area well lit.
•
Do not install or use machine in explosive or dangerous environment.
•
Keep visitors away from tool. Anyone unqualified to run the tool should have no
interaction with the tool.
Maintenance:
•
Disconnect machine from power when making repairs or changing the blade.
•
Check for damaged parts, if any part is found damaged it needs to be properly repaired
or replaced.
•
Ensure that blade tension and blade tracking are properly adjusted.
•
To prolong blade life release blade tension at the end of each work day.
