12
NOTES
The cutting head must be raised to the maximum up position then brought down to
un-lock the head lock feature. Do not force the head down as this may damage the
saw.
4.2 USE AS AN AUTONOMOUS CUTTING SAW
a) Secure the workpiece to be cut in the vise using the vise adjusting screw (12) or
quick release lever (14). Set your cutting pressure as described above.
b) With the cutting head at its maximum height carefully lower the cutting head until
the blade is approx. ¼” above the workpiece.
c) Activate the trigger switch and trigger lock located in the hand grip to start the
cutting process.
d) Lower the blade onto the workpiece and let go of the handle and it will cut the part
automatically. When cut is finished, the blade will automatically stop.
e) When the cut is finished and the saw shuts off, raise head all the way up to lock it
then remove the cut part.
DANGER
– CAUTION
This saw is equipped with an emergency stop button (15). In case of a problem
while autonomous hands free cutting, this button can be pushed to stop all
the saws functions.
5. MAINTENANCE - STORAGE - ASSISTANCE - DISPOSAL
NOTES
Routine maintenance operations which can be performed by the user are described
below.
Have the machine repaired by qualified personnel only. This machine complies with
all the relevant safety prescriptions. Repairs to the machine must be carried out by
skilled personnel only using original spare parts. Failure to observe this
recommendation could jeopardize user safety.
DANGER - WARNING
• BEFORE PERFORMING ANY MAINTENANCE WORK THE MACHINE MUST BE
DISCONENCTED FROM THE POWER SOURCE AND LOCKED OUT.
5.1 INSTRUCTIONS FOR REPLACING THE SAW BLADE
DANGER - WARNING
WEAR PROTECTIVE GLOVES.
Tools required:
- Appropriate Allen keys and/or Phillips screwdrivers are needed to replace the
blade.
Check the rotation of the used blade. Notice arrow direction on the head frame.
NOTES
Use of used blades is not recommended.
Check the compatibility of the NEW blade for the saw.
