Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
10
REV122021
977701V
CONTROLS
Emergency Stop Button:
When this is pressed the power to the motor and controls is
disconnected. The frequency drive stores energy, this will remain lit for approximately 20
seconds.
Spindle Direction:
Turn the spindle direction switch to the desired direction forward, reverse, or
stop. If the emergency stop button is pushed or if the power is lost you will have to move this to
stop (to reset) then to desired spindle direction.
Stop:
This is used when you would like the spindle to stop.
Forward:
This is used for standard drilling and tapping operations.
Reverse:
This is used for left-hand tapping and to retract a tap during tapping operations.
