2
MACHINE SPECIFICATIONS
.
1. INSTALLATION PLACEMENT:
CAUTION
Machine Specifications
10 Ton Bench
10 Ton Floor
20 Ton Floor
Press Type
Manual 10-ton Bench
Manual 10-ton Floor
Manual 20-ton floor
Cylinder Type
Single Acting
Single Acting
Single Acting
Max. Press Capacity
10 Ton
10 Ton
20 Ton
Ram Diameter
1- 1/2"
1- 1/2"
2"
Ram Stroke
6"
6"
8"
Head Travel
Left / Right of center
Left / Right of center
Left / Right of center
Ram Travel Per Stroke
1/8" approx.
1/8" approx.
3/16” approx.
Width Between Uprights
16-3/4"
16-3/4"
23"
Width Between Channels
3"
3"
4"
Max. Ram to Table
16"
38"
39"
Overall Height
36"
60"
74"
Weight
132 lbs.
149 lbs.
283 lbs.
INSTALLATION OF PRESS
PRESS PLACEMENT SELECTION
1. Location of press should be in a well-lit area that will not interfere
with other machines or operations.
2. Carefully unbox machine components from shipping carton.
Inspect all packing as not to throw out any parts or manuals.
3. When transporting the machine please use caution. If using a sling
have someone steady the machine while transporting it.
4. Install your press on a sturdy level floor surface, or work bench.
The machine must be anchored to the floor or workbench
securely.
5. After installing the press, use a degreasing product to clean off the
anti-rust oil which was applied at the factory. Then wipe machined
surfaces (such as ram) with a light coating of lubricant oil.
6. Read rest of the
owner’s manual before operating this machine.
Review and understand all safety instructions.
Summary of Contents for 972200
Page 15: ...13 10 TON BENCH UTILITY PRESS ...
Page 17: ...15 10 TON FLOOR UTILITY PRESS ...