MODEL:06A-618BR
TROUBLE SOLVING
PROBLEMS
POSSIBLE CAUSES
CORRECTION ACTIONS
Air leaking in head cap.
⒈
Loose screws.
⒉
Worn or damaged O-rings or seals.
⒈
Tighten screws.
Install overhaul kit.
⒉
Lack of power.
Slow to cycle.
⒈
Tool is too dry.
Air pressure too low.
Exhaust blocked.
⒉
⒊
⒈
Add about 2-3 drops of
lubrication into the air connector.
⒉
Make sure the air compressor
is set between 70psi and 115psi.
Clean exhaust channel.
⒊
Not shooting fasteners .
⒈
Damaged pusher spring.
Wrong size of fasteners.
⒉
⒈
Replace spring.
⒉
Use 1/2" crown staples.
⒈
Fix the drive channel.
Replace the piston.
Remove the bent fasteners,
replace with the 1/2"crown staples.
Clean magazine.
Tighten screws.
Verify that fasteners are the
correct size.
⒉
⒊
⒋
⒌
⒍
⒈
Drive channel is worn.
Piston is broken or worn.
Bent fasteners.
Dirty magazine.
Loose magazine.
Wrong fasteners.
⒉
⒊
⒋
⒌
⒍
Fasteners are
jammed in the tool
frequently.
www.chinaairtool.com
08
