DAIZUKI DXTC-20, User Manual

Page: 11 / 34

8
my home
+
>
Set your home location, get more
information
Welcome home
V
All Devices
Living Room room Master Bed
...
No device
Add Device
Home Me
1.Power on the indoor unit, no need to launch the air conditioner.
2.Click "+" in the upper right corner of the "Home" screen
or tap "Add device" on the room which has no device.
3.Tap the "Split Air conditioner" logo.
4.Reset the Wi-Fi module by pressing the "DISPLAY" on the remote
controller 6 times , or use a suitable tool to press the reset button
on the Wi-Fi module, until it shows
"CF"
on the indoor display,
then tap"Next Step".
5.Input the password of the Wi-Fi which the same as your smart
phone connected, tap "Confirm"(You can change network if needed).
6.You can see the percent rate of connecting process,
at the same time
PP","SA","AP" shining in turn on the indoor display.
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
Add Device
<
Add Manually
Search Device
Large
Home Ap...
Security &
Sensors Split Air condi-
tioner Window Ty
pe Air Conditi... Dehumidifier
Port-
able Air cond... Fresh air
purifier
Add Device
<
AP Mode
Add Device
Press the DISPLAY on the remote
control key 6 times in the time of 6
seconds until the LCD screen show
"CF"
View help
Next Step
Add Device
<
AP Mode
Enter Wi-Fi
password
This app is supported only on
2.4GHz Wi-Fi channels
******
Confirm
Change network
wifiname
Add Device
<
Connecting now
Make sure your phone and device
are as close to your router as possible.
Searching for device
o Registering device to the cloud
o Initializing your device
50%
Add Device
<
Device added
successfully
Sample1
/LYLQJ5R 0DVWHU%H 6HFRQG%
'LQLQJ5 .LWFKHQ 6WXG\5R
Rename the
device
Select the
location room
enter password
Done
Add device
There are 2 modes CF(Quick connection) and AP(Access Point) for adding device.
CF mode