Daiwha Meditom DT-300S, User Manual

Page: 20 / 61

3 . Specifications20
3.2 Operating Modes and Output Parameters
(DT-400S) Tolerance:±20%
Mode
Carrier Frequency
(
㎑
)
Repeat
Frequency(
㎑
)
Output RF Power
(W)
Load Resistance(Ω)
Pure mode 400 - 400 500
Blend1 mode 400 33 320 300
Blend2 mode 400 33 240 300
Blend3 mode 400 33 160 300
Forced mode 400 33 120 300
Soft mode 400 33 120 300
Spray mode 400 33 100 500
Cut mode 482 - 100 200
Standard mode 482 - 100 100
Soft mode 482 - 80 100
(DT-300S) Tolerance:±20%
Mode
Carrier Frequency
(
㎑
)
Repeat
Frequency(
㎑
)
Output RF Power
(W)
Load Resistance(Ω)
Pure mode 400 - 300 500
Blend1 mode 400 33 300 300
Blend2 mode 400 33 220 300
Blend3 mode 400 33 140 300
Forced mode 400 33 100 300
Soft mode 400 33 100 300
Spray mode 400 33 100 500
Cut mode 482 - 100 200
Standard mode 482 - 100 100
Soft mode 482 - 80 100
3.3 Functions
1) Good linearity and stabilization of output power by microprocessor.
2) EMC design that is in accord with EN60601-1-2 [2001] and EN60601-2-2 [2001].
3) Remote Control using two Hand pieces (Selection between cutting and coagulation)
4) Selection between cutting and coagulation by Foot switch (Can be also used as an
exclusive switch for laparoscope.