Product name: Pegasus
Product Model: DWA-9400
Rated voltage: 110-120 V
Rated frequency: 50/60 Hz
Rated Current:1.5 A
Safety design: Class I
TECHNICAL SPECIFICATIONS
TROUBLE SHOOTING
No.
Problem
Check the following:
Explanations / Remedies
Noises are heard
during operation
Operation fails to
start
Airbags within the
seat and the legrests
fail to work properly
Airbags within the
seat and the legrests
fail to work properly
The massage chair has
detected some error that
it is unable to display.
Clean out the air tubes.
Are the air tubes
blocked?
Turn off power, then turn it on
again. If the problem
persists, disconnect the
power plug from the wall
outlet and contact an
authorized repairman
Has the power plug
slipped out of the wall
outlet?
Is the power switch in the
“off” position? Has the
fuse blown out?
These noises are normal and
arise from friction between
the massage rollers and the
leather cover.
Connect the power plug
securely to the wall outlet.
Switch power to the “on”
position. Replace the fuse
with another of the same
type.
N/A
If you encounter problems operating the Pegasus, please check the points above to see if
they can be rectified. If the Pegasus still malfunctions or does not work, please turn off the
chair and remove the power plug from the electrical outlet.
Contact U.S. Jaclean Repair Service at 310-538-2298 for assistance.
Do not dismantle or attempt to repair the chair yourself. Doing so will void the
warranty and U.S.Jaclean/Daiwa will not bear any responsibility for any subsequent
consequences.
IMPORTANT
