Page 3
a)
Press
to turn the sleep function on or off. Sleep icon is on or off when sleep function is turned on or off.
b)
Press
to turn on or off the swing function.
is on when swing function is on.
c)
Press
to set “
∩
” in fan speed display area to activate the wall pad sensor or set “F” in fan speed display area
to isolate the wall pad sensor.
Press
to confirm settings and exit. If no operation within 6 seconds, it will automatically exit but will not save settings.
6.
Temperature setting
Press
or
to set temperature. Set point temperature is shown on temperature display area.
Press
to confirm settings and exit. If no operation within 6 seconds, it will automatically exit and the setting will not
be saved.
When DIP SW1=ON, set point temperature is fixed. In cooling mode, set point temperature is 24
℃. In heating mode, set
point temperature is 21℃.
When DIP SW1=OFF, temperature can be set from 16
℃
to 30
℃
.
When DIP SW2=ON, set point temperature is shown on temperature display area.
When DIP SW2=OFF, room temperature is shown on temperature display area.
The DIP SW1 and SW2 switch can be found at the back of the controller as shown:
7.
Mode setting
Press
to set COOL, HEAT, FAN, DRY or AUTO (Display both COOL and HEAT icons) mode alternatively.
8.
Key Lock
Press
and
for 5 seconds to set key lock function. Key lock icon is on or off when key lock function is set to on or off.
9.
Fan speed setting
Press
to set LOW, MEDIUM, HIGH or AUTO speed.
10. ON/OFF setting
Press
to turn on or off the unit.
11. Temperature unit setting
Press
and
at the same time for 5 seconds to change temperature unit between Celsius and Fahrenheit.
12. Network control (Only master unit can control slave units)
Press
four times to set network control and “Network” icon is on. The slave unit number is blinking in real time display
area.
Press
or
to select slave unit which is online. The offline slave unit number is not shown.
Press
to select parameters: ON/OFF unit, temperature, mode, fan speed, swing and sleep.
Press
to set the selected parameter.
1) ON/OFF unit: Press
button once,
blinks in master-slave display area, then press
to turn on unit (
blinks)
or turn OFF unit (
blinks).
2) Temperature: Press
twice, temperature blinks in temperature display area, then press
or
to set
temperature.
3) Mode: Press
three times, Mode icon blinks in mode display area, then press
to select mode.
4) FAN SPEED: Press
four times, fan speed icon blinks in fan speed display area, then press
to set fan speed.
