manualshive.com logo in svg

Daitsu HP-4200B, Owner'S Manual, Page: 18 / 55

Share
Download
Daitsu HP-4200B Owner'S Manual Download Page 18

Connect the TV Antenna cable to the TV input jack. Press INPUT button on the remote control and 
select TV on OSD.

Use PG+/PG- button or numeric button to change TV programme for your programme selection. 

Press Pre.PG button on the remote control to tune the previous programme. 

Also, you can tune to cable service provided programmes using the cable box. For further information 
regarding cable TV service, contact cable TV service provider(s).

This signal of SCART 2 port takes first priority over other input signals.

When an outer device which is connected to SCART 2 port is 

"

Power On

"

, the monitor will automatically 

display the signal of SCART 2 port. The display mode (4:3, 16:9) will be automatically recognized until users 
purposely change the display mode.

When users operate up/down button or numeric button on the remote control, input source is changed to TV 
mode automatically.

The SCART 2 recognizes automatically both composite signal and RGB signal. 

18

Connecting the TV Cable

OWNER'S MANUAL

1

2

3

4

Connecting the TV Cable

The Function of SCART 2 Port

TV Antenna Cable

Summary of Contents for HP-4200B
























































Reviews:

No comments