Function buttons (continued)
Model: RG51B1/(C)EU,
RG51B/(C)EU,
RG51B26/(C)EU,
RG51B30/(C)EU,
RG51B32/(C)EU,
RG51B31/(C)EU.
NOTE:
RG51B/(C)EU models
have no SWING and FOLLOW
ME buttons ;RG51B1/(C)EU
models have no FOLLOW ME
button; RG51B30/(C)EU models
have no SWING ,FOLLOW
ME buttons and MED FAN
feature,and SLEEP button instead
of ECONOMY button; RG51B32/
(C)EU models have no FOLLOW
ME button and MED FAN
feature,and SLEEP button instead
of ECONOMY button;RG51B31/
(C)EU models have on FOLLOW
ME button.
MODE display
Displays the current selected mode. Including AUTO,
COOL, DRY, HEAT (cooling & heating models only)and
FAN.
Transmission Indiscator
This transmission indicator will light when remote
controller transmits signals to the indoor unit.
Temp./Timer display
The temperature setting (from 17OC(62O F) to
30OC(88OF)) or timer setting (0~24h) will be displayed.
If FAN mode is selected, there will be no display.
ON/OFF display
This indicator will be displayed when the unit is
operating.
MODE display
(FAN mode)
FAN SPEED display
Displays the selected fan speed: AUTO, HIGH, MED
and LOW. Nothing displays when the fan speed is
selected in AUTO speed. When AUTO or DRY Mode is
selected, there will be no signals displayed.
NOTE:
RG51B19/(C)E-M model has no MED FAN speed
feature.
Model: RG51B17/(C)EU
NOTE:
While the unit is running under SLEEP mode,
it would be cancelled if ON/OFF, FAN SPEED, SLEEP
or MODE button is pressed.
10. TIMRT OFF Butt
on
Press this button to activate the Auto-off time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-off time setting, just press the button until
the time setting is 0.0.
11. LO
CK Button
Press this recessed button to lock all current
settings, and the remote controller will not accept
any operation except that of the LOCK. Use the
LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK
button again to cancel the LOCK function. A lock
symbol will appear on the remote controller display
when the lock function is activated.
12. LED Display B
utton
Press this button to clear the display on the
indoor unit, press it again to light the display .
NOTE: RG51B18/(C)E ,RG51B19/(C)E-M,
RG51B20/(C)E models have no this feature.
13. FOLLOW ME/TEMP SENSING
Button
- Press this button to initiate FOLLOW ME function.
- When the Follow Me function is activated, the
remote display is actual temperature at its location.
The remote control will send this signal to the air
conditioner every 3 minutes interval until press
the Follow Me button again.
- The Follow Me function is not available under
DRY and FAN mode.
- Switch the operation mode or turn off the unit will
cancel the follow me function automatically.
14. ION Button
When push this button, the ion generator is
energized and will help to remove pollen and
impurities from the air.
FOLLOW ME display
When pressing FOLLOW ME/TEMP SENSING button
in COOL or HEAT mode, the remote sensing function is
activated and this indicator displays
TIMER display
This display area shows the settings of the TIMER.
That is, if only the Auto-on time function is set, it will
display TIMER ON. If only the Auto-off time function
is set, it will display TIMER OFF. If both functions are
set, it will display TIMER ON OFF which indicates you
have chosen both the Auto-on time and Auto-off time.
LOCK indiscato
r
LOCK display is displayed when pushing the LOCK
button. Push the LOCK button to clear display.
Indicators on LCD
19
20
