background image

The drainage tank is full 
If the drainage tank becomes full (approx. 5.5 liters), the “     ” lamp lights to alert the user, operation stops
automatically. Empty the water from the drainage tank and discard it.

INGLES

- 40 -

Operation

Operation

Drainage steps 

1. Remove the drainage tank 

Lightly pressing on the sides of the tank with
both hands, pull it gently out.

Take hold of the handle, and then remove the tank.

Notation for drainage

● 

Do not remove the bubble packing from the float

on the unit. The float on the unit will no longer be
able to detect without the bubble packing when
the water level is full, and water may leak from
the water tank onto household furniture. This
can cause electrical shock and/or short-circuiting.

● 

If the drainage tank is dirty, wash it with cold or

lukewarm water. Do not use detergent, scou-
ring pads, chemically treated dustcloths, gaso-
line, benzene, thinner, or other solvents to
clean it, as these can scratch and damage the
tank and cause water to leak.

● 

Draining the water

3. Switch the operation mode

• Press the “1/0” switch, the unit operates in CONTINOUS mode automatically.
• DEHUMIDIFY mode: Press ”    ” switch until the “   ” lamp lights.

Operation is continue with the amount of discharged air at the middle level.

• Modo SECAR COLADA: Press“    ” switch until the“    ”. lamps lights,

Operation is continue with the amount of discharged air at the high level.
This is appropriate for enhanced dehumidifying, drying clothes or other
items (when the indoor temperature is below 15ºC or above 35ºC, the protec-
tion device is actuated, the unit only can operate in LAUNDRY mode and
pressing “      ” switch is ineffective.

• QUIET mode: Press “      ” switch until the “    ” lamp lights. Operation is

continue with the amount of discharged air at the low level. This suppres-
ses operation noise when dehumidifying (Under the condition of high
temperature and high humidity, please avoid operating the unit in QUIET
mode, as this can decrease the life of the unit.)

4. Stop operation 

When the “1/0” switch is pressed during the unit runs:
• Dehumidifying stops.
• Never stop the unit by unplugging the power supply cord.

Summary of Contents for ADD12













Reviews: