background image

INGLES

Maintenance

The dehumidifying
function does
not work.

Is the air filter clogged?

Is air intake port or discharge
port obstructed?

Clean the air filter as instructed under
“Caring for the dehumidifier”.

Remove whatever is obstructing the
discharge port or intake port.

No air is discharged.

Is the air filter clogged?

Clean the air filter as instructed under
“Caring for the dehumidifier”.

Operation is noisy.

Has the unit been poorly
installed so it is tilted or
unsteady?

Is the air filter clogged?

Use the unit in a stable, sturdy location.
Prompt: Put a cushion under the unit
and help to reduce operation noise.

Clean the air filter as instructed under
“Caring for the dehumidifier”.

● 

After the above condition has occurred and corresponding step is used but the breakdown can not be
removed or other breakdown occurs, please contact the authorized service centers.

The following symptoms do not indicate a breakdown.

Maintenance

● 

Removing breakdowns

Symptom 

Reason

The operation noise suddenly increases
during use.

The operation noise increases when the compressor is
activated.

Very little dehumidifying takes place, or
none takes place.

This happens if the temperature and/or humidity of the
room is low.

When the unit is first used, 
the discharged air smells musty.

Because the temperature of the head exchanger rises
abruptly, an unusual or musty odor may be produced
for a moment.

The humidity do not drop.

Is the room too big for the unit?
Are windows or doors opened and closed frequently? 
Is there a device in the room such as a 
kerosene stove, which emits steam?

- 44 -

Summary of Contents for ADD12













Reviews: