7
IMPORTANT: there are no factory programmed user codes.
5.5 Managing user codes
The user codes are for secondary and occasional users (service staff, employees, etc.).
They allow for limited and temporary use of the keypad:
• restricted access to specific commands or specific groups can be programmed for each user code,
• each user code can be enabled or disabled at any time.
The keypad has 8 user codes.
To programme or modify a user code, enter:
Example: after entering the master code (1234), programme user number 1 (1213) by entering:
5.5.1 Disabling and enabling a user code
User codes can be disabled or enabled in the 3 operating modes.
A programmed user code is automatically enabled.
To disable or enable a user code, enter:
Example: to disable user code 1, enter:
master code
user code
1 to 8 (choice
of user number)
user code
master code
0: disabled
1: enabled
1 to 8 (choice
of user number)
5.5.2 Restricted access to commands
User codes can have separate limited access to:
• specific keypad
command buttons
,
• specific
groups
.
Only selected commands or groups can be accessed when the user code is entered.
• To
restrict
a user code to (a)
specific command button(s)
, enter:
Example: to
restrict user code 1
(1213) to the
Partial 1 command
, enter:
In this case, only the Partial 1 button can be accessed via user code 1.
...
master code
user code
1 to 8 (choice
of user number)
user code
command
button(s)
• To
restrict
a user code to (a)
specific group(s)
, enter:
Example: to
restrict user code 1
(1213) to
Group 1
and
Group 2
, enter:
In this case, user code 1 can only disarm and arm Group 1 and Group 2.
...
master code
user code
1 to 8 (choice
of user number)
user code
groups 1 to 8
5.5.3 Restricted access to both a command button and a group
Example: to
restrict user code 1
(1213) to
Group 1 Arm/Disarm
and the
Partial 1
button, enter:
In this case, user code 1 can only disarm or arm Group 1
and operate the Partial 1 button.
Group 1
“Partial one”
command button
