DAITEM 145-21X, Installation Manual, Page: 8 / 19

GB
73
1. Before fixing the detector, place them
close to the fixing point and check the
radio link with the control panel.
If the link with the control panel is correct,
the control panel issues a voice message
identifying the detector activated.
2. Press (> 5 sec.) the “test” button on the
detector, the control panel issues the
following voice message: “beep, test,
detector X (customised message), group Y,
(immediate or delayed or combined)”.
Fastening
screw
.
Top
Bottom
d
1. Drill the fixing holes using the drilling
template provided in the packing box.
2. To fix the back
box on the wall
using wall plugs
and suitable
screws (not
provided).
3. Close
the radio
box.
4. Position the
detection
module on
the back box
then tighten
the screws.
6. Installation
6.1 Testing the radio link 6.2 Fixing
)
)
)
)
)
“beep, test detector X, group Y,
(immediate or delayed
or combined)”