Installation Guide
3
Installation of Device into Back Housing
Insert the back housing piece
into the junction box and
secure with two screws.
To reset the network of the device,
remove the faceplate from the
device. Then press and hold the
reset button for 5 seconds. Install
the faceplate back onto the device.
Press either dimming up or down
button to enter the pairing mode
to join the device to a network.
Separate the battery cover
from the device. Pull the
plastic insulation strip out
of the battery compartment.
Put the battery cover back
on the device.
Network Reset
1
2
3
Install the main body of the
device into the back housing.
Install the faceplate onto the
device. Note: Device supports
the use of other standard
faceplates on the market.
4
5
Daintree® Wireless Controls
Wireless Scene Switch(WWD2-4IW)
Use two standard screwdriver
to remove the devices from
the back housing
