GE and the GE Monogram are trademarks of the General Electric Company and are used under license. Information provided is subject to change
without notice. All values are design or typical values when measured under laboratory conditions, and GE makes no warranty or guarantee,
express or implied, that such performance will be obtained under end-use conditions. © 2019 GE Current, a Daintree company.
www.LED.com
SIGN220 (Rev 12/17/19) A-1001149
Wattage
Power Supply
Long Description
80W
GEPS24D-80U
Power Supply (24VDC / 96W), Input Voltage: 108-305VAC;
Damp Rated; Self-Contained, Remote or Raceway;
1 Output Bank; Class 2
GEPS24W-80
Power Supply (24VDC/180W), Input Voltage: 90-305VAC;
Damp Rated; Self-Contained, Remote or Raceway;
2 Output Banks of 90W each; Class 2
100W
GEPS24-100U-GL
GEPS24-100U-NA
GEPS24-100U-GLX
Power Supply (24VDC / 96W), Input Voltage: 108-305VAC;
Damp Rated; Self-Contained, Remote or Raceway;
1 Output Bank; Class 2
180W
GEPS24-180U
Power Supply (24VDC/96W), Input Voltage: 108-305VAC;
Damp Rated; 1 Output Bank; Class 2
300W
GEPS24-300U-GL
0-10V Dimming Power Supply (24VDC/80W), Input Voltage: 90-305VAC;
Damp Rated; Self-Contained, Remote or Raceway;
1 Output Bank; Class 2
Power Supply Specifications
Troubleshooting
This product is intended solely for the use of non-residential signage lighting and is not intended for use in any other applications.
Conforms to the following standards:
III
Symptom
Solution
Row of fixtures does not light
•
Check wire connections to power supply to ensure red stripe-to-red and white-to-black
connections.
•
Check row-to-row polarity connections.
Sign does not light
•
Check input and output voltage and check power supply input/output connections.
•
Check polarity connections.
Individual fixture does not light
•
Remove fixture and replace with another working fixture.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
This Class [A] RFLD complies with the Canadian standard ICES-005. Ce DEFR de la classe [A] est conforme à la NMB-005 du Canada.
