Lumination
®
(Recessed Architectural Luminaire Series)
Installation Guide
Rotate latches to unlock the front bezel.
2
Swing down panel and lift off front bezel with diffuser.
3
Turn off power.
1
NOTE:
The following steps depict the 2x2 series luminaire. However, the procedure is the same for the 2x4 series.
Door Replacement Steps
Remove replacement door from packaging and
inspect door before installing. Ensure diffuser has
not loosened from door frame.
4
Hang panel on its hinges and swing up into place.
Rotate latches on front bezel to fasten it.
5
Restore power after panel is closed.
6
www.gecurrent.com
© 2021 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information provided is subject to change without
notice. All values are design or typical values when measured under laboratory conditions.
IND213 (Rev 04/02/2021)
