Project Name
Date
Type
Catalog Number
AGENT/DISTRIBUTOR NAME-LOGO
FIELD
-
INSTALLABLE MOUNTING AND ACCESSORY OPTIONS
Mounting/Accessory Options
NOTE:
If you press button, the remote led indicators will show the latest parameters which
were sent.
DDIISSPP
-1-
-2-
BRIGHTNESS
HOLD TIME
DAYLIGHT
SENSOR
STAND-BY DIM
STAND-BY TIME
High end trim turning function(To
Set the output level of connected
lighting during occupancy)
To represents the time that the
Sensor will keep the light at low dim
level after the HOLD TIME elapsed.
To represents various thresholds of
natural light level for the Sensor .
The daylight sensor stops working,
and all motion detected could turn on
the lighting fixture, no matter how
bright the natural light is.
LED
DESCRIPTION
DESCRIPTION
The time that the Sensor will turn
off(if you choose stand-by level is
0) or dim the light to a low level
after the area is vacated
SENSITIVITY
To set the occupancy sensing
sensitivity of the Sensor
LED
To set the output level of connected
lighting during vacancy. The sensor
will regulate the lighting output at
the set level. Setting the STAND-BY
DIM level at 0 means light full off
duringvacancy.
To select the current surrounding lux
value as the daylight threshold. This
feature enables the fixture to function
well in any real application
circumstances.
LED INDICATORS
SPECIFICATIONS
Power
supply
Carrying case
Upload
range
Op
.
temperature
Dimensions
2
x
AAA
1
.
5V
battery
,
Alkaline
preferred
RC-100 in carrying case
Up
to
15
m
(50
ft
.
)
0°C~50°C (32°F~122°F)
123
x
70
x
20.3
mm
(
4
.
84
"
x
2.76
"
x
0
.
8
"
)
Sensor
Remote
Programmer
OPERATION
INSTRUCTIONS
RC-100
Remove
the
batteries
from
compartment
if
the
remote
will
not
be
used
in
30
days
.
WARNING
OVERVIEW
The
Wireless IR Configuration Tool is a handheld tool for remote configuration of
remote control
IR-enabled fixture integrated sensors. The tool enables device to modify via pushbutton without
ladders or tools, and stores up to four sensor parameter modes to speed configuration of multiple
sensors.
The
uses bidirectional IR communication to send and receive sensor settings at
remote control
mounting height up to 50 feet. The device can display previously established sensor parameters,
copy parameters and send new parameters or store parameter profiles. For projects where identical
settings may be desired across a large number of areas or spaces, this capability provides a
streamlined method of configuration. Settings can be copied throughout a site, or in different sites.
with carrying case
REMOTE
500
300
100
50
30
10
MODE4
MODE3
MODE2
MODE1
DAYLIGHT
SENSOR
BUTTON OPERATION
Press button, all settings go
back to settings of dip Switch in
sensor.
OONN//
OOFFFF
Press button, upload the
current parameters to sensor(s),
the led light which the sensor
connects will
on/off as confirm.
SSEENNDD
O
OKK
Press button, the sensor starts to
function and all settings remain the same
as the latest status before the light is
switched on/off.
AAUUTTOO
Enter in the setting condition, the
parameter leds of remote control will
flash to be selected. and Navigate to
UP and Down for choose selected
parameters in LED indicators.
The button is for testing purpose
sensitivity only. after you choose sensitivity
thresholds, then you press button,
The sensor goes to test mode(hold time is
only 2s) automatically ,meanwhile the
stand-by period and daylight sensor are
disabled. Press button to quit from
this mode.
TTEESSTT
2s
BUTTON
DESCRIPTION
BUTTON
DESCRIPTION
RREESSEETT
DDIISSPP
Display the current/lastest setting
parameters in LED indicators(the
LED indicators will on for showing
the setting parameters).
4 Scene modes with preset
parameters which are available to
be changed and saved in modes.
MMOODDEE11 MMOODDEE22
MMOODDEE33 MMOODDEE44
Navigate to LEFT and RIGHT for
choose selected parameters in
LED indicators.
SETTING
The SETTING Content contains all available settings and parameters for remote sensors. It
allows you to change the available control, parameters, and operation of the sensor from
factory default or current parameters.
Change multiple settings of sensor(s)
1.Press button, the remote control leds will show the latest parameters you set.
Confirm the selected parameters
selected parameters in remote
control.
Open and close smart daylight Sensor.
Press or Enter in the setting
condition, the parameter leds of remote
control will flash to be selected, Press
for open or close smart daylight
Sensor.
DDIISSPP
SSEENNDD
TTEESSTT
2s
TTEESSTT
2s
AAUUTTOO
NOTE:
the setting works key step is by Push or
,
enter in the setting condition.
NOTE:
the led light which the sensor connects will on/off after getting the new parameter as confirm.
RREESSEETT
Press the button, the light goes
to permanent on or permanent off
mode, and the sensor is disabled.
(MUST press button to quit this
mode for Setting.
AAUUTTOO
OONN//
OOFFFF
AAUUTTOO
OONN//
OOFFFF
AAUUTTOO
NOTE:
if you push button before, you must push button to unlock the sensor.
2.Press or enter in the setting condition, the parameter leds of remote control will flash to be
selected, navigate to the desired setting by pressing to select the new parameters.
3.Press ok to confirm all setting and saving.
4.Aim at the target sensor and press to upload the new parameter, the led light which the sensor
connects will on/off as confirm.
Albeo
®
ARC Series
LED IP65 Round High Bay
MOUNTING/ACCESSORY OPTIONS
IMAGE
ORDER SKU#
DIMENSIONS/NOTES
ARC Emergency Battery Back-Up Kit
(120-277V)
120-277V
- 93142311
Unit installed atop ARC fixture
Safety Tether (optional)
100W
- 93142318
150W
- 93142319
200-240W
- 93142320
Cable length:
0.53m (21 in.)
Wire Guard (optional)
100W
- 93142300
150W
- 93142301
200-240W
- 93142302
100W:
H 3cm (1.2 in.); Dia 26cm (10.2 in.)
150W:
H 3cm (1.2 in.); Dia 28.9 cm (11.4 in.)
200-240W:
H 3cm (1.2 in.); Dia 33.3cm (13.1 in.)
Polycarbonate Refractor (optional)
100W
- 93142303
150W
- 93142304
200-240W
- 93142305
100W:
H 16.4cm (6.5 in.); Dia 41cm (16 in.)
150W
: H 14.9cm (5.9 in.); Dia 41cm (16 in.)
200-240W:
H 18.1cm (7.1 in.); Dia 48cm (18.9 in.)
Polycarbonate Drop Lens (optional)
100-150W
- 93142306
200-240W
- 93142307
Drop lens adds:
100W:
H 3.6cm (1.4 in.)
150W:
H 3.6cm (1.4 in.)
200-240W:
H 4.1cm (1.6 in.)
Aluminum Reflector (optional)
100W
- 93142308
150W
- 93142309
200-240W
- 93142310
100W:
H 13.7cm (5.4 in.); Dia 35cm (14 in.)
150W:
H 15.3cm (6 in.); Dia 36.5cm (14.4 in.)
200-240W:
H 17.3cm (6.8 in.); Dia 41.4cm (16.3 in.)
Wall Mount Bracket (optional) (Not
Yet Available)
Coming Soon
Total Height of assembly from top of bracket to
bottom of fixture:
100W:
20.7cm (8.2 in.)
150W:
23.5cm (9.3 in.)
200-240W:
22.8cm (9 in.)
12V Tri-level occupancy and/or light
sensor (optional)
Sensor
- 93142316
Remote
- 93142317
Notes:
1. Easy plug-and-play install to center face of fixture;
maintains IP65 rating
2. Sensor requires remote if programming is desired
