20
5.4 PAIRING WITH GPS NAVIGATOR
5�4�1 GPS pairing
1. To access the Configuration voice menu, press and hold the
center button for 10” until the “Configuration menu” voice
prompt is emitted.
2. Pressing the (+) button repeatedly until the “GPS pairing”
voice prompt is emitted.
3. Search for Bluetooth
®
devices on the GPS navigation screen.
Select “AGV ARK” from the list of detected devices.
4. Enter 0000 as PIN (confirmation may or may not be required).
5. The GPS confirms successful pairing and that ARK is
ready for use. The voice prompt “Your headset is paired”
is emitted.
6. If the pairing process is not completed within 3’, ARK returns
to standby mode.
Notice!
You must use GPS specifically designed for motorcycles, that
transmit voice instructions via Bluetooth
®
. Most car GPS sys-
tems do not have this feature.
When Audio Overlay
™
is enabled, if you pair the GPS device via
GPS pairing, its instructions do not interrupt intercom conver-
sations but overlay them.
5�4�2 Pairing as mobile phone
If GPS is also your preferred source of Bluetooth
®
stereo music,
you can pair GPS to ARK by following the simple procedures
described in 5.1, “Pairing with smartphone - phones, Bluetooth
®
stereo device”. In this case, ARK interprets the GPS as if it was
a phone, so you cannot pair the phone to ARK. However, some
GPS systems support the AC Bluetooth
®
bridging, so the phone
can be paired to them, irrespective of ARK.