19
5.3 ADVANCED SELECTIVE PAIRING A2DP
STEREO OR HFP PHONE
When using a smartphone, ARK normally allows both stereo
music playback and remote management. However, sometimes
you may need to use ARK selectively for stereo music only or for
phone calls only. These instructions are intended for experienced
users who only wish to pair ARK with smartphones with a selec-
tive profile: A2DP for stereo music or HFP for phone calls.
If you previously paired a phone with ARK, you must clear the pre-
vious pairing list on both devices: phone and ARK. To reset the
pairing list to ARK, perform a factory reset or follow the proce-
dure to reset the pairing list described in section 14.9, Factory
Reset, or 14.6, Delete all pairings. To clear the pairing list on your
phone, refer to your phone’s manual (or, for most smartphones,
delete ARK from the Bluetooth
®
device list in the settings menu).
5�3�1 A2DP stereo music only
To access the Setup voice menu, press and hold the centre but-
ton for 10” until the “Configuration menu” voice prompt is emit-
ted.
Press the (+) button until the “Media selective pairing” voice
prompt is emitted.
Search for Bluetooth
®
devices on your smartphone. Select AGV
from the list of devices detected on your phone.
Enter 0000 as PIN (may not be required or confirmation may be
required).
The phone confirms that pairing has taken place and that ARK
is ready to use. The voice prompt “Your headset is paired” is
emitted.
5�3�2 HFP call only
To access the Setup voice menu, press and hold the centre but-
ton for 10” until the “Configuration menu” voice prompt is emit-
ted.
Press the (+) button until the “Phone selective pairing” voice
prompt is heard.
Search for Bluetooth
®
devices on your smartphone. Select “AGV
ARK” from the list of devices detected on your phone.
Enter 0000 as PIN (may not be required or confirmation may be
required).
The phone confirms that pairing has taken place and that ARK
is ready to use. The voice prompt “Your headset is paired” is
emitted.