HXHD125A7V1B
VRVIII system indoor unit
4PW62585-1 – 11.2010
Operation manual
18
5.12. Field settings
The configuration of the Daikin system is done through field settings.
In this operation manual all field settings related to the operation of
the unit and user demand are explained. A list of all those field
settings and default values is given under
"5.13. Field settings table"
on page 19
. In this same list, we provided for 2 columns to register
the date and value of altered field settings at variance with the default
value.
For a total list of field settings, refer to the installation manual.
All field settings are accessible and programmable through the user
interface on the indoor unit.
Each field setting is assigned a 3-digit number or code, for example
[5-03], which is indicated on the user interface display. The first digit
[5] indicates the 'first code' or field setting group. The second and
third digit [03] together indicate the 'second code'.
Procedure
To change one or more field settings, proceed as follows.
1
Press the
z
button for a minimum of 5 seconds to enter FIELD
SET MODE.
The
$
icon (3) will be displayed. The current selected field
setting code is indicated
;
(2), with the set value displayed to
the right
-
(1).
2
Press the
ébi
button to select the appropriate field setting
first code.
3
Press the
ébj
button to select the appropriate field setting
second code.
4
Press the
pfi
button and
pfj
button to change
the set value of the select field setting.
5
Save the new value by pressing the
pr
button.
6
Repeat step 2 through 4 to change other field settings as
required.
7
When finished, press the
z
button to exit FIELD SET MODE.
INFORMATION
Changes made to a specific field setting are only stored
when the
pr
button is pressed. Navigating to a new field
setting code or pressing the
z
button will discard the
change made.
2
3
1
INFORMATION
■
Before shipping, the set values have been set as
shown under
"5.13. Field settings table" on page 19
.
■
When exiting FIELD SET MODE, "
88
" may be
displayed on the remote controller LCD while the unit
initializes itself.
NOTICE
■
When running through the field settings you may
notice that there are some more field settings as there
are mentioned in the
"5.13. Field settings table" on
page 19
.
These field settings are not applicable
and may not be changed!
■
For more information about installation related setting,
see installation manual of the indoor unit. For settings
different from the default value, contact your installer.